PRQ 108 Series Hydraulic Starters

Diesel Fuel Engines 1-5 Litre Liter, Gaseous Fuel Engines 1+ Liter

For a comprehensive list of model and replacement part #’s click HERE.

Features Of The 108 Series Include

Industry exclusive 18 month warranty.

Up to 22 ft-lbs of torque over the entire RPM range — suitable for diesel engines 1-5 litres in displacement and gaseous fuel engines over 1+ litres.

HSV model with integrated “Soft Start”, HS model with external “Soft Start” allows complete protection of the engine ring gear and starter pinion by “pre-engaging” the pinion, eliminating the shock load of a typical hydraulic starter. It also offers high level of protection against operator error (ie; engaging into a running engine).

Robust, industry standard inertia drive.

Standard and customer pinion/flange combinations allow starters for a variety of engines ie; Cummins ®, Ford ®, Detroit Diesel ®, etc.

Commonly used on materials handling equipment, small gas compression units, portable power generation equipment, marine applications and others.

Pinion housing rotates in 30° increments allowing for installation flexibility.

Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life. Maintenance, if required, is simple and cost effective.

Simple, cost effective maintenance of the starter end with no need for special or proprietary tools.

More than adequate torque to start any engine even in -40 degree weather.

Standard rear and side hydraulic ports for flexible and easy installation.

Standard case drain for motor protection

Available engineering support from the factory on special projects and hydraulic system mapping.

Tech Specs

Recommended Engine Size — Diesel 1-5 Litre, Gaseous 1+ Litre

Hydraulic Supply Pressure — 1500 – 3000 PSI (3000 PSI Recommended)

Hydraulic Flow Required — 8-12GPM

Torque @3000 PSI — 22 ft-lbs (116)

Operating Temperature Range — -40°C – 82°C

Standard Mounting Flange — SAE #3, SAE #1, Ford ®, Other

Standard Pinion Characteristics — Engine Dependent

Rated Pinion Speed — 4000+ RPM

Weight — 30Lbs (W/ Soft Start)

Complete List Of Model #’s

HSV Starters Have The Soft Start Integrated From Factory, HS Starters Utilize Either An External Or No Soft Start.

6-HS-108 RH1U

6-HS-108 RH2U

6-HS-108 RH3U

6-HS-108 RH4U

6-HS-108 RH5U

6-HS-108 RH6U

6-HSV-108 RH1U

6-HSV-108 RH2U

6-HSV-108 RH3U

6-HSV-108 RH4U

6-HSV-108 RH5U

6-HSV-108 RH6U

The above starters are fully supported by Strumco and the factory. Service kits, parts, and common starters are available and typically in stock. Please contact Strumco for more information.