PRQ 114/116 Series Hydraulic Starters

Diesel Fuel Engines 4-14 Litre Liter, Gaseous Fuel Engines 4+ Liter

 

For a comprehensive list of model and replacement part #’s click HERE.

Features Of The 114/116 Series Include

  • Industry exclusive 18 month warranty.
  • Up to 44 ft-lbs of torque over the entire RPM range — suitable for diesel engines 4-14 litres in displacement and gaseous fuel engines over 4+ litres.
  • HSV model with integrated “Soft Start”, HS model with external “Soft Start” allows complete protection of the engine ring gear and starter pinion by “pre-engaging” the pinion, eliminating the shock load of a typical hydraulic starter. It also offers high level of protection against operator error (ie; engaging into a running engine).
  • Robust, industry standard inertia drive.
  • Standard and customer pinion/flange combinations allow starters for a variety of engines ie; CAT ® 3300, Cummins ®, Ford ®, Detroit Diesel ®, etc.
  • Commonly used on materials handling equipment, small gas compression units, portable power generation equipment, marine applications and others.
  • Pinion housing rotates in 30° increments allowing for installation flexibility.
  • Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life. Maintenance, if required, is simple and cost effective.
  • Simple, cost effective maintenance of the starter end with no need for special or proprietary tools.
  • More than adequate torque to start any engine even in -40 degree weather.
  • Standard rear and side hydraulic ports for flexible and easy installation.
  • Standard case drain for motor protection
  • Available engineering support from the factory on special projects and hydraulic system mapping.
 

Tech Specs

  • Recommended Engine Size — Diesel 4-14 Litre, Gaseous 4+ Litre
  • Hydraulic Supply Pressure — 1500 – 3000 PSI (3000 PSI Recommended)
  • Hydraulic Flow Required — 12 – 17 GPM
  • Torque @3000 PSI — 44 ft-lbs (116)
  • Operating Temperature Range — -40°C – 82°C
  • Standard Mounting Flange — SAE #3, SAE #1, Ford ®, Other
  • Standard Pinion Characteristics — 12T 8/10DP, Other
  • Rated Pinion Speed — 3000+ RPM
  • Weight — 28Lbs (W/ Soft Start)
  •  

    Complete List Of Model #’s

    HSV Starters Have The Soft Start Integrated From Factory, HS Starters Utilize Either An External Or No Soft Start.

  • 6-HS-114 RH1U
  • 6-HS-114 RH2U
  • 6-HS-114 RH3U
  • 6-HS-114 RH4U
  • 6-HS-114 RH5U
  • 6-HS-114 RH6U
  • 6-HSV-114 RH1U
  • 6-HSV-114 RH2U
  • 6-HSV-114 RH3U
  • 6-HSV-114 RH4U
  • 6-HSV-114 RH5U
  • 6-HSV-114 RH6U
  • 6-HS-116 RH1U
  • 6-HS-116 RH2U
  • 6-HS-116 RH3U
  • 6-HS-116 RH4U
  • 6-HS-116 RH5U
  • 6-HS-116 RH6U
  • 6-HSV-116 RH1U
  • 6-HSV-116 RH2U
  • 6-HSV-116 RH3U
  • 6-HSV-116 RH4U
  • 6-HSV-116 RH5U
  • 6-HSV-116 RH6U
  • 6-10-644
  • The above starters are fully supported by Strumco and the factory. Service kits, parts, and common starters are available and typically in stock. Please contact Strumco for more information.