Hydraulic Starters
 |
 |
 |
Hydraulic Starters Produce Higher Torque And Speed Resulting In Faster Engine Starting.
Strumco is the Air, Hydraulic, and Spring starter specially company in Western Canada. We know Hydraulic Starters, distributing all major brands, Pow-R-Quik, SA Industries, Gali, and Kocsis.
We also offer a complete line of OEM and cost effective aftermarket parts.
We know that when equipment is down, you need an immediate response,and we will have the parts and service you need get you up and running again.
Pow-R-Quik Hydraulic Starters are the industry standard and the go to starter for almost every well servicing and hydraulic fracturing services company in North America. They are very well suited for use on hydraulic start systems for a number of different applications including gas compression. PRQ starters come with an industry exclusive 18 month warranty.
PRQ Hydraulic Starters HS series of heavy duty engine starters were specifically designed and developed for the oil and gas service industry. Strumco maintains a vast reference library where customers can receive assistance in starter selection, mounting instructions, engine and starter rotation, substitute starter model numbers, OEM crossovers and obsolete or superceded part numbers.
PRQ Starters are available for engines as little as 1 liter in displacement all the way to 200+ liter industrial engines. All pinion and flange combinations are available to cover most engines on the market.
PRQ HS/HSV/HSCV-360 Series Hydraulic Starter
- The 360 series hydraulic starters are the most effective starter for diesel engines above 50 liter in displacement and gaseous fuel engines over 200 liter in displacement.
- New universal starter with integrated soft start, provides extremely high levels of protection to the starter and engine ring gear
- Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life. Maintenance, if required, is simple and cost effective.
- Industry standard friction clutch drive.
- New model starters come standard with both side and rear hydraulic ports, offering installation flexibility.
Click Here To See All 360 Series Starter Features and Model #’s
PRQ HS/HSV-224 Series Hydraulic Starter
- 224 series starters are designed for diesel engines with a displacement of 10-49 liters and gaseous fuel engines 20+ liters.
- New model starter with built in soft-start provides extremely high levels of protection for the starter and the engine ring gear
- Industry standard friction clutch drive
- Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life
Click Here To See All 224 Series Starter Features and Model #’s
PRQ HS/HSV-223 Series Hydraulic Starter
- 223 series starters are designed for diesel engines with a displacement of 8-30 litres, gaseous fuel engines 8+ liters.
- New model starter with built in soft-start provides extremely high levels of protection for the starter and the engine ring gear
- Industry standard friction clutch drive
- Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life
Click Here To See All 223 Series Starter Features and Model #’s
PRQ HS/HSV 114 and 116 Series Hydraulic Starter
- 114/116 series starters are designed for engines with a displacement up to 14 Litres
- Soft-start provides extremely high levels of protection for the starter and the engine ring gear
- Versatile mounting options with rotatable body sections and both rear and side hydraulic ports
- Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life
Click Here To See All 114/116 Series Starter Features and Model #’s
PRQ HSV-108 Series Hydraulic Starter
- 108 series starters are designed for engines with a displacement up to 5 Litres
- Soft-start provides extremely high levels of protection for the starter and the engine ring gear
- Versatile mounting options with rotatable body sections and both rear and side hydraulic ports
- Severe duty gear type hydraulic motors which resist damage to contamination and have an extremely long service life
Click Here To See All 108 Series Starter Features and Model #’s
Kocsis Hydraulic Starters
Kocsis Hydraulic Starters A Series(CMO)
The A series Hydraulic Starter is not to be underestimated. Although small and extremely light (11 lbs), this starter provides quite a punch with 15 ft-lbs of torque and the ability to turn at 7000 RPM. This translates into extremely fast engine starting of engines up to 9 liters (549 cu. in.). These smaller engines are quite common on lifeboats, which is a prime example when fast starting is paramount.
A Series (CMO) Hydraulic Starters Pdf 
 |
Flange type: SAE#3 Flange to ring gear dimension: 0.098″ Number of teeth: 12 Diametral pitch: 8/10 Pinion outside diameter: 1.825″ Pressure angle: 20° Rotation: Clockwise Pinion housing: Aluminum Barrel: Steel Piston: Bronze Alloy |
Number of pistons: 7 Displacement: 0.50 in³/REV Speed range: 0-7000 RPM Drive type: Inertia Maximum working pressure: 3000 PSI Duty cycle: Intermittent Maximum torque: 15 Ft-lbs Weight: 11.0 lbs Overall volumetric efficiency: 92% Recommended fluid: Red hydraulic fluid (MIL-H-5606) |
Kocsis Hydraulic Starters B Series(CMA)
The B series Hydraulic starter is by far the model that is offered in the most variations. This starter is commonly relied upon for dependable starting with the combination of torque and modularity. Providing 45 ft-lbs of torque in a 17 lb package, the B series starter is a workhorse. Depending on conditions, the B series starter cranks up to 18 liter (1098 cu. in.) engines which are quite common in the marine industry.
B Series (CMA) Hydraulic Starters Pdf
 |
Flange type: SAE#3
Flange to ring gear dimension: 2.00″ Number of teeth: 11 Diametral pitch: 6/8 Pinion outside diameter: 2.240″ Pressure angle: 20° Rotation: Clockwise Motor housing: Aluminum Pinion housing: Ductile iron Barrel: Steel Piston: Bronze Alloy |
Number of pistons: 7
Displacement: 1.35 in³/REV Speed range: 0-7000 RPM Drive type: Inertia Maximum working pressure: 3000 PSI Duty cycle: Intermittent Maximum torque: 45 Ft-lbs Weight: 17.0 lbs Overall volumetric efficiency: 92% Recommended fluid: Red hydraulic fl uid (MIL-H-5606) |
C Series (CMD-2A) Hydraulic Starters
The C series hydraulic starter fit a vast array of engines with a bit of overlap on both the low and high ends. This model features 72 ft-lbs of torque in only a 35 lb product commonly used in applications which include blenders, gensets and pumping engines.
C Series (CMD-2A) Hydraulic Starters Pdf
 |
Flange type: SAE#3
Flange to ring gear dimension: 2.00″ Number of teeth: 11 Diametral pitch: 6/8 Pinion outside diameter: 2.250″ Pressure angle: 20° Rotation: Clockwise Motor housing: Aluminum Pinion housing: Ductile iron Barrel: Steel Piston: Bronze Alloy |
Piston: Bronze Alloy
Number of pistons: 7 Displacement: 2.00 in³/REV Speed range: 0-4500 RPM Drive type: Inertia Maximum working pressure: 3000 PSI Duty cycle: Intermittent Maximum torque: 72 Ft-lbs Weight: 35.0 lbs Overall volumetric effiiency: 92% Recommended fluid: Red hydraulic fluid (MIL-H-5606) |
Kocsis Hydraulic Starters D Series(CMD-3A)
This model convincingly produces 120 ft-lbs of torque in only a 40 lb package. D series Hydraulic starter is common in numerous applications, including fire pumps, gensets and frac pumps. This model of starter dependably starts engines up to 41 liter displacement (2500 cu. in.).
D Series (CMD-3A) Hydraulic Starters Pdf
 |
Flange type: SAE#3 Flange to ring gear dimension: 2.00″ Number of teeth: 12 Diametral pitch: 6/8 Pinion outside diameter: 2.250″ Pressure angle: 20° Rotation: Clockwise Pinion housing: Ductile iron Barrel: Steel Piston: Bronze Alloy |
Number of pistons: 7 Displacement: 3.50 in³/REV Speed range: 0-4500 RPM Drive type: Inertia Maximum working pressure: 3000 PSI Duty cycle: Intermittent Maximum torque: 120 Ft-lbs Weight: 40.0 lbs Overall volumetric efficiency: 92% Recommended fluid: Red hydraulic fluid (MIL-H-5606)
|
Kocsis Hydraulic Starters E Series(CME-5A)
The starter of choice by engine OEM’s, the E series Hydraulic Starter repeatedly produces 200 ft-lb of torque. While weighing significantly less than other gear motor driven starters at 46 lbs, the E Series provides more power per pound than others. The E Series starter can be found in applications including, but not limited to frac pumps, emergency gensets and fire pumps on offshore platforms. The E series Hydraulic Starter can start an engine up to 100 liters (6100 cu. in.).
E Series (CME-5A) Hydraulic Starters Pdf
 |
Flange type: SAE#3 Flange to ring gear dimension: 2.00” Number of teeth: 12 Diametral pitch: 6/8 Pinion outside diameter: 2.250” Pressure angle: 20° Rotation: Clockwise Motor housing: Aluminum Pinion housing: Ductile iron Barrel: Steel Piston: Steel alloy |
Number of pistons: 9 Displacement: 5.88in³/REV Speed range: 0-3000 RPM Drive type: Inertia Maximum working pressure: 3000 PSI Duty cycle: Intermittent Maximum Torque: 200 Ft-lbs. Weight: 46.0 lbs Overall volumetric efficiency: 92% Recommended fluid: Red hydraulic fluid (MIL-H-5606) |
SA Industries Hydraulic Starters
 |
SA Industries hydraulic starters available at Strumco Air Starter and mount to most popular oil & gas industrial engines.They are manufactured to strict engineering standards, enabling them to operate in the toughest of conditions. |