Ingersoll Rand Accessories

 

Ingersoll Rand Accessories

Ingersoll Rand Accessories

 

Any manufacturer can provide equipment or aftermarket accessories that people need in order to be productive on the job. At Strumco Air Starter, we believe productivity goes beyond product. That’s why we take a 360-degree, total solutions approach to everything we do and provide our total solutions approach enhances productivity by providing critical support and solutions when and where they’re needed. Strumco Air Starter serves its customers with complete starter parts, parts diagrams and parts lists for virtually any model of current or obsolete starters. Contact Strumco Air Starter Customer Service 780.468.0050 to request a parts breakdown.

Ingersoll Rand Parts And Accessories  PDF_doc

Ingersoll Rand Strainers ST900-267-16

IR strainers are used in the air line to assure long starter life where air or gas is contaminated. The strainer screens the starter air utilizing a 300-mesh element reinforced on two sides by a 20-mesh internal stainless steel screen to ensure air integrity.

ST900-267-24_m
ST900-267-16 1″ – 1″ 3 (1.36) ST900-266-16 3BMG, 5BMG, SS175G Strainer
ST900-267-24 1-1/2″ – 1-1/2″ 8 (3.36) ST900-266-24 150BM, SS350G, 150T, ST400 Strainer
ST900-267-32 2″ – 2″ 12.50 (5.67) ST900-266-32 SS800, ST700, ST900, ST600 Strainer
ST900-267-64 4″ – 4″ 60 (27.24) ST900-266-64 SS800, ST700, ST900, ST600
Check Valves 150BMP-1054
The 150BMP-1056 is a brass-bodied check valve designed for use in receiver charging systems.
The 150BMP-1054 is a combination check valve/pressure relief valve.
150BMP-1056_m
  • 150BMP-1054    .1 lb (.04 kg)        3/4″       Combination Pressure Relief / Check Valve
  • 150BMP-1056    .37 lb (.16 kg)     1/2″       Check Valve
  • ST400-1056         .37 lb (.16 kg)     3/4″       Check Valve with O-Ring

Drain Valve  150BMP-1067

Used to keep air supplies clean and free of water and other contaminants

150BMP-1067_m
  • 150BMP-1067 1/2″ NPT Connection .1 lb (.04 kg)

Gladhands Coupling 150BMP-1058

Should air pressure ever be lost, the Gladhand makes it simple to pump up your system from any nearby truck.

150BMP-1058_m Maximum Operating Pressure: 150 psiMaximum Operating Temperature: 200ºF

150BMP-1058 1/2″ .49 lb (.22 kg)

Ingersoll Rand In-Line Lubricators NL-24-8

Use Inline Lubricators from Strumco to help improve the quality of compressed air, reduce wear.

NL-24-8_m
  • Reservoir: 1/2 Pint Metal
  • Maximum Operating Temperature = 175°F (79°C)
  • Maximum Operating Pressure = 250 psi (17.2 bar)
  • Cv= 26
  • Media: Air, Clean natural gas
  • Operating Flow Range at 100 psig (6.9 bar)
  • 160 to 600 scfm (78 to 283 dm 3/s)
  • NL-24-8 1-1/2″ – 1-1/2″ 2.70 (.1.22)
  • NL-8-8 1/2″ – 1/2″ 1.70 (.77)

Ingersoll Rand Liquid Sealant SMB – 431

Liquid Sealants should always be used to ensure an air-tight system for air and gas applications.

 

SMB-431_m
  • SMB-431   50 cc “Plastic Gasket” For Gas Sealing .18 (.08)
  • SMB-441   50 cc PTFE® Sealant For Pipe Threads .03 (.01)

Ingersoll Rand Mufflers SS800 – A674

Ingersoll Rand Mufflers are designed to effectively limit starting noise levels.

.

  • 150BM-A674 for 150BM
  • 3BM-A674     for 3BM, 5BM
  • 3BM-WM07   for 3BM, 5BM
  • SS350-A674  for SS350
  • SS800-A674  for SS800
  • ST500-674     for 150T, ST500

Ingersoll Rand One-Shot Lubricators HDL2

These small, rugged one-shot lubrication devices dispense a controlled amount of lubricant each time the air starter is engaged.

Attached directly to the starter, these lubricators are self-priming lubrication pumps, which can draw oil from as far away as four feet.

HDL2_m
  • Operating Temperature: -30°F to 250°F (-34°C to 121°C)
  • Operating Air Pressure Range: 40 to 250 psi (2.8 to 17.2 bar)
  • Operating Lube Pressure: 0-50 psi
  • All-Viton Seals
  • HDL2 = 1.3 cc
  • HDL3 = 0.4 cc

Ingersoll Rand Pressure Gauges 150BMP – 1064

With a large readout dial, the air pressure gauge assures the user that sufficient air pressure is available for starting before user shuts off engine.

 

150BMP-1064_m
  • 150BMP-1064  2.25″ Dash Mount Gauge
  • 150BMP-1064L  2″  Standard Industrial Gauge
  • SRV125F-1064  2.71″  Industrial Gauge

Ingersoll Rand Pressure Regulators NR24-8

Ingersoll Rand pressure regulators are rated to 450psi (31 bar) and are high flow (2200 scfm at 150 psi) maximum performance of your start system.

_DSC0040_l_thumb
  • Fluid: Compressed air
  • Type: Relieving, non-bleeding
  • Ports: 1-1/2′ or 2′
  • NR-24-8  1-1/2″
  • NR-24-8-2  2″

Ingersoll Rand Push Button Control Valves SMB-618

The chrome-plated SMB-G618 valve is available for use in marine, offshore, and natural gas applications.

The brass bodies SMB-618 valve is suitable for air applications only.

SRV150_m
  • Operating Temperature Range: -40 to 200°F (-40 to 93.3°C)
  • Maximum Operating Pressure: 225 psi (15.5 bar)
  • SMB-618 1/8″ – 1/8″ .47 (.21) Air-approved Push Button Valve
  • SMB-618-G 1/8″ – 1/8″ .48 (.21) Gas-approved Push Button Valve

Ingersoll-Rand Relay Valves SRV 150

Ingersoll-Rand Relay Valves provide immediate response to assure Air Starter disengagement and prevent damage to the pinion or flywheel ring gear.

SRV150_m
  • Maximum Operating Pressure = 225 psi (15.5 bar)
  • Operating Temperature Range = -20 to 250°F (-29 to 121°C)
  • Flow/ Pressure Drop shown on CSR-352:Cv= 28.5
  • SRV100 1″ – 1″ 3BMG, 5BMG, 33175G
  • SRV125 1-1/4″ – 1-1/4″ 150BM, SS350G, 150T
  • SRV125F 1-1/4″ Flanged 150T/150BM
  • SRV125T 1-1/4″ – 1-1/4″ 150BM, SS350G, 150T
  • SRV150 1-1/2″ – 1-1/2″ SS800, ST700, ST900, ST600
  • SRV150SS 1-1/2″ – 1-1/2″ SS800, ST700, ST900, ST600

Ingersoll Rand Road Splash Deflectors SS800 – A735

These road splash deflectors are designed to prevent contamination from entering the exhaust port of the starter.

Used in applications where a muffler is not required.

SS350-A735_m
  • 150BM-A735 150BM Splash Deflector 1-1/4″ (31.75mm)
  • SS350-A735  SS350 Splash Deflector 1-1/2″ (38.10mm)
  • SS800-A735  SS800, SS660, &SM450 2-1/2″ (63.50mm)
  • ST500-A735  150T, SSST500 Series 2″ (50.80mm)

Ingersoll Rand RR Series Regulator Relay Valves RR125 – F30

Ingersoll Rand regulator relay valves combine the features of a pressure regulator and a solenoid controlled relay valve in one compact device.

RR1521_l_thumb
  • Combines a pressure regulator and a relay valve
  • Includes solenoid valve with manual override feature
  • Mounts directly to starter
  • Available in 1-1/4′, 1-1/2′, and 2-1/2′ port sizes
  • Max. inlet pressure: 30 bar (435 psi)
  • Max. outlet pressure: 10 bar (145 psi)
  • Voltage: 24 volts DC
  • Power: 9.5 watts
  • RR125-F30 (38633764) 1800 scfm 435 1-1/4″
  • RR152-F30 (38600714) 1800 scfm 435 1-1/2″
  • RR250-F30 (16675845) 3400 scfm 435 2-1/2″

Ingersoll Rand Solenoid Control Valves 150BMP – 1051B

These DC electrically actuated valves are designed for pilot operation of the IR relay valve and are approved for applications affected by the U.S.

150BMP-2451B_m
  • Valve Type Three-way nrmally closed Cv Factor: 0.21
  • Power Consumption: 25 watts
  • 150BMP-1051B 1/4″ – 1/4″ Long wire leads 12 volt
  • 150BMP-2451B 1/4″ – 1/4″ Long wire leads 24 volt
  • 150BMP-6451 1/4″ – 1/4″ Long wire leads 64 volt
  • 150BMP-A105C 1/4″ – 1/4″ Pioneer Connector lead 12 volt

Ingersoll Rand Stainless Steel Air Strainers ST1000 – 267 – 24

  • ST1000-267-24 1-1/2″ ST1000-266-24 ST1000, SS800, 150BM, SS350.
  • ST1000-267-32 2″ ST1000-266-32 ST1000, SS800 Strainer (40 mesh)

Ingersoll Rand Accessories Part Numbers

 

Relay Valves SRV100 SRV125 SRV125T SRV150 SRV150SSRelay Valve Tune Up Kit SRV150-TK3 J-3 – J-4 Solenoid Control Valves 150BMP-1051B 150BMP-2451B 150BMP-6451B 150BMP-A1051C Angle Mounting Bracket 150BMP-B2451 J-5 Solenoid Control Valves ST400-A339M ST400-C339 ST400 Repair Kit ST400-K619 J-6 Push Button Control Valves SMB-618 SMB-G618 White Push Button Replacement SMB-619 Black Push Button Replacement SMB-620 J-7 Air Strainers ST900-267-16 ST900-267-24 ST900-267-32 ST900-267-64 J-8 – J-9 Mufflers 3BM-WM07 3BM-A674 150BM-A674 SS350-A674 ST500-674 SS800-A674 J-10 Regulators NR-24-8 NR-24-8 Tune Up Kit NR24-TK1 J-11 – J-12 In-Line Lubricators NL-8-8 NL-24-8 J-13 – J-14 One-Shot Lubricators HDL2 HDL3 J-15 HDL2 Replacement Kit HDL2-TK1 J-15 HDL3 Replacement Kit HDL3-TK1 J-15 Road Splash Deflectors 150BM-A735 SS350-A735 ST500-A735 SS800-A735 J-16 Exhaust Tube Kit ST500-K740 J-16 Liquid Sealant SMB-431 SMB-441 J-16 Check Valves 150BMP-1056 150BMP-1054 ST400-1056 J-17 Drain Valve 150BMP-1067 J-17 Gladhand Coupling 150BMP-1058 J-18 Pressure Gauges 150BMP-1064 150BMP-1064L J-18 Ingersoll Rand Accessories