5000 Psi Piston Accumulators

Designed Per ASME Section VIII, Div. 1 Standards

 

Kocsis Technologies, Inc. began manufacturing Piston Accumulators with the purchase of the American–Bosch piston accumulator product line in 1990.Through continuous improvement of our manufacturing techniques, development of new products, and the commitment to our engineering and sales staff, Strumco continues to provide fluid power control solutions to our customers’ needs. The 5,000 psi rated accumulator range in bore size from 4 to 12 inches. Capacities range from 1 quart to 20 gallons and beyond. Strumco Air Starter specializes in custom piston accumulators designed to meet your application needs.

Accumulators Numbers Matrix   PDF_doc

A40-5KSI 5000 Psi Piston Accumulators

5000-psi-piston-accumulator A40-5KSI 5000 Psi Piston Accumulators  PDF_doc

  • End Steel Cap Material:
  • Housing: Material: Steel
  • Standard Fluid Port: SAE #16 O-Ring
  • Piston Material: Aluminum
  • Sealing Material: Buna-N
  • Back-Up/ Wear Ring Material: Teflon
  • Gas Valve Material: Stainless Steel
  • Proof Pressure: 6,500 psi (448 bar)
  • Temp. Range: -20°F to 200°F (-29°C to 93°C)
  • Seal Kit Part Number KT-207416

A60-5KSI 5000 Psi Piston Accumulators 

5000-psi-piston-accumulator A60-5KSI 5000 Psi Piston Accumulators  PDF_doc

  • End Cap: Material Steel
  • Standard Port: Size SAE #20 O-Ring
  • Piston Material: Aluminum
  • Sealing Material: Buna-N
  • Back-Up/ Wear Ring Material: Teflon
  • Gas Valve Material Stainless Steel
  • Proof Pressure: 6,500 psi (448 bar)
  • Max working Pressure: 5,000 psi (345 bar)
  • Temp. Range: -20°F to 200°F (-29°C to 93°C)
  • Seal Kit Part Number KT-206357
  • Special Paints/ Coatings

A70-5KSI 5000 Psi Piston Accumulators

5000-psi-piston-accumulator A70-5KSI 5000 Psi Piston Accumulators  PDF_doc

  • Housing and End Cap Material Steel
  • Standard Fluid Port: SAE #20 O-Ring
  • Piston Material: Aluminum
  • Sealing Material: Buna-N
  • Back-Up/ Wear Ring Material: Teflon
  • Gas Valve Materia: Stainless Steel
  • Proof Pressure: 6,500 psi (448 bar)
  • Proof Pressure: 3,900 psi (269 bar)
  • Temp Range: -20°F to 200°F (-29°C to 93°C)
  • Temp Range: 36°F to 200°F (2°C to 93°C)
  • Seal Kit Part Number: KT-207800

The standard ABC 5000 Psi Piston Accumulators are been used in numerous applications throughout the years. These 5000 Psi Piston Accumulators units features high quality seamless tubing, segment ring retained end caps and an auxiliary fuse assembly. The end caps are recessed in the housing providing protection for the gas valve

ABC-5KSI 5000 Psi Piston Accumulators

5000-psi-piston-accumulators 5000-psi-piston-accumulators-cut-away-1 ABC-5KSI 5000 Psi Piston Accumulators  PDF_doc

  • Housing and End Cap: Material: Steel
  • Port Size: 3/4″ NPTF
  • Piston Material: Aluminum
  • Sealing Material: Buna-N
  • Back-Up/ Wear Ring Material: Teflon
  • Gas Valve Material: Stainless Steel
  • Max Working Pressure: 5,000 psi (345 bar)
  • Proof Pressure: 6,500 psi (448 bar)
  • Temp Range: 0°F to 200°F (-18°C to 93°C)
  • Seal Kit Part Number: KT-208855
  • Wide Range of Bore Sizes and Capacities
  • Standard Bore Sizes Including: 4.0”, 6.0”, 7.0”, 9.0”, and 12.0”
  • Custom Bore Sizes
  • Nearly Endless Capacities from 1 quart to 160 gallon
  • Numerous Sealing Options
  • Countless compounds available
  • Nitrile (Buna), Flourocarbon (Viton), Ethylene Propylene, etc.
  • Several sealing geometries to meet application demands
  • T-seals, Polyseals, “High-Cycling” sealing sets
  • High and low temperature materialsHigh pressure seals
  • Pressure Ranges
  • Standard Pressures Including: 3000 & 5000 psi
  • Custom Pressures Up to 17,500 psi
  • Porting Options
  • SAE 4–Bolt Flange